The BCMGUNFIGHTER Compensator MOD was designed for 5.56 /.223REM caliber AR15 rifles to reduce muzzle rise, flash, noise, and pressure. The MOD1 version is compatible with A2-mounted Suppressors. The tuned slots and interior cone mitigate recoil, muzzle-rise and suppress flash. The BCMGUNFIGHTER Compensator also cuts down on side pressure and noise to those around you, which is perfect for CQB or other close range contact. Bravo Company Manufacturing built it for the 21st Century Gunfighter!
Shipping only within the United States
Extended version of the BCMGUNFIGHTER MOD 0 - 5.56 (Patent Pending
Predrilled hole at the base for permanent installation
Should be installed by qualified military armorer
Thread: 1/2X28 - Standard AR15
Must be mounted by BATF Specifications for a 14.5" barrel to extend past 16" to be non-NFA
Mount per BATF specs to bring your 14.5 inch barrel over 16 inches (non-NFA)
The combustion gasses exiting the muzzle of a rifle are extremely hot, traveling at extreme velocity, and contains not only burning gasses but solid particles of unburnt powder as well as metals from the projectile. Due to the inherent nature of steel, it is nearly impossible to survive unaffected in this environment when directly exposed. The high temperatures begin to make the steel more malleable, which allows solid particles and pressure waves to deform and erode surfaces upon exit.
Due to the new and unique design of the BCM compensators, the user may notice small pits on the interior surfaces of the compensator. This is normal. Most designs do not impede the exit flow very much, while the BCM approach is exactly opposite. These surfaces are specifically designed to operate within the environment found at the muzzle, and are intended to allow significant amounts of deterioration before any loss of performance is seen/felt. These compensators have been tested through many thousands of rounds, and while the wear surfaces may give pause to some users, trust when we say that it's normal.
Posted by Unknown on 8th Nov 2013
Great muzzle compensator. Mitigates recoil effectively helping me to stay on target for followup shots. Can't speak to the flash suppression because I haven't tested in low light/no light environment. I blind-pinned and welded the device on myself. BCM provides a pin and crush washer with the compensator (no surprise there...BCM always takes care of their customers). Predator Armament shipped quickly, and their price ($81 on sale) was the lowest I have seen so far. I would definitely recommend this product, and will use it again myself for future builds.
Posted by Timothy Dukes on 22nd Feb 2013
This comp rocks!!! Styling is awesome, and performance is outstanding!! 2 thumbs up!!